Fernando Mesa, German Correa Velez, Pedro Pablo Cardenas Alzate
A note on the construction and numerical solution of the heat equation
Contemporary Engineering Sciences, Vol. 11, 2018, no. 77, 3799-3806
doi: 10.12988/ces.2018.85234
Juan B. Restrepo, Ramiro Betancourt G, Gerard Olivar
Modeling of a bioreactor-extractor for the production of biodiesel part 1: dynamic shortcut model
Contemporary Engineering Sciences, Vol. 11, 2018, no. 77, 3807-3815
doi: 10.12988/ces.2018.88404
H. H. Ortiz-Alvarez, E. Restrepo-Parra, F. N. Jimenez-Garcia
Monte Carlo simulation of magnetoresistance in double exchange mixed valence manganites
Contemporary Engineering Sciences, Vol. 11, 2018, no. 77, 3827-3839
doi: 10.12988/ces.2018.87331
Liz Belcy Gonzalez-Marrugo, Edgard Alexander Granados-Llamas, Clemente Granados-Conde, Candelaria Nahir Tejada-Tovar, Rodrigo Ortega-Toro
Extraction and evaluation of the antioxidant properties of coriander (Coriandrum sativum) seed essential oil
Contemporary Engineering Sciences, Vol. 11, 2018, no. 77, 3841-3848
doi: 10.12988/ces.2018.87356
Samuel de la Hoz Vega, Bernardo Vasquez Jaraba, Jose Perez Mendoza, Alberto Albis Arrieta, Luis Obregon Quinones
Effect of precipitating solvents on the extraction of pectin from the pomelo albedo by acid hydrolysis
Contemporary Engineering Sciences, Vol. 11, 2018, no. 78, 3849-3855
doi: 10.12988/ces.2018.88412
Yarely Maza, Yeimmy Peralta-Ruiz, Juan B. Restrepo
Problem solving using CAPE-OPEN software: residue curves case study
Contemporary Engineering Sciences, Vol. 11, 2018, no. 78, 3857-3864
doi: 10.12988/ces.2018.88409
Rody Salcedo Orozco, Paul Monroy Chavez, Guillermo Valencia-Ochoa, Eugenio Yime-Rodriguez, Javier Roldan-Mckinley
Light thresholds for a light dependent resistor sensor in an OSPS prototype
Contemporary Engineering Sciences, Vol. 11, 2018, no. 78, 3865-3872
doi: 10.12988/ces.2018.88385
Hegel Rincon Laurens, Guillermo E. Valencia, Javier Cardenas Gutierrez
Colombia's contribution to the use of biogas from solid waste: a bibliometric analysis
Contemporary Engineering Sciences, Vol. 11, 2018, no. 78, 3873-3882
doi: 10.12988/ces.2018.87342
Milton Coba Salcedo, Guillermo Valencia Ochoa, Carlos Acevedo Penaloza
Probability parameters and estimated firestone abbott plateau honing curves
Contemporary Engineering Sciences, Vol. 11, 2018, no. 78, 3883-3892
doi: 10.12988/ces.2018.88426
Cristian Pedraza-Yepes, Jose Daniel Hernandez-Vasquez, Oscar Fabian Higuera-Cobos, German Roca Gomez, Ulises Ospino Lopez
Comparison of alternatives for digital scales' calibration according to Guide SIM
Contemporary Engineering Sciences, Vol. 11, 2018, no. 78, 3893-3900
doi: 10.12988/ces.2018.88434
Milton F. Coba Salcedo, Carlos Acevedo Penaloza, Gustavo Guerrero Gomez
Mechanical characterization of impact resistance by pendulum tensile test on PETG and PA6 thermoplastics
Contemporary Engineering Sciences, Vol. 11, 2018, no. 79, 3901-3910
doi: 10.12988/ces.2018.88379
Milton F. Coba Salcedo, Carlos Acevedo Penaloza, Gaudy Prada Botia
Influence of sample thickness and indenter mass on dynamic indentation tests of PEGT and PA6 thermoplastics
Contemporary Engineering Sciences, Vol. 11, 2018, no. 79, 3911-3919
doi: 10.12988/ces.2018.88380
Milton F. Coba Salcedo, Carlos Acevedo Penaloza, Gustavo Guerrero Gomez
Design of a ball burnishing tool with interchangeable tip
Contemporary Engineering Sciences, Vol. 11, 2018, no. 79, 3921-3927
doi: 10.12988/ces.2018.88402
Milton Coba Salcedo, Javier Cardenas Gutierrez, Carlos Acevedo Penaloza
Influence of natural frequency on stability during milling of Inconel and Udimet 500
Contemporary Engineering Sciences, Vol. 11, 2018, no. 79, 3929-3937
doi: 10.12988/ces.2018.88422
Milton Coba Salcedo, Jhan P. Rojas, Carlos Acevedo Penaloza
Study of the influence of the honing process by plastic deformation on the turning of AISI 1045steel
Contemporary Engineering Sciences, Vol. 11, 2018, no. 79, 3939-3947
doi: 10.12988/ces.2018.88424
Milton F. Coba Salcedo, Carlos Acevedo Penaloza, Gaudy Prada Botia
Influence of indenter diameter on dynamic indentation tests of PEGT and PA6 thermoplastics
Contemporary Engineering Sciences, Vol. 11, 2018, no. 80, 3949-3959
doi: 10.12988/ces.2018.88440
Andres Galindo Montero, Jhonny Perez Montiel, Yoma Mendoza Guerra
Technological innovation of an anaerobic reactor dual chamber for municipal wastewater treatment
Contemporary Engineering Sciences, Vol. 11, 2018, no. 80, 3961-3970
doi: 10.12988/ces.2018.88451
Alina Margarita Berdugo Rodriguez, Jairo Plaza Castillo, Hugo Hernandez Palma
Design of a low-speed electrical generator with automatic load shedding and powered by non-conventional energy sources
Contemporary Engineering Sciences, Vol. 11, 2018, no. 80, 3971-3980
doi: 10.12988/ces.2018.88429
Carlos Vargas Mercado, Hugo G. Hernandez P., Teremy Tovar Ortega
Importance of education based on citizens 'competences to encourage the competitiveness of the knowledge society
Contemporary Engineering Sciences, Vol. 11, 2018, no. 80, 3981-3990
doi: 10.12988/ces.2018.88430
Clemente Granados-Conde, Alex Ivan Arrieta-Llamas, Miladys Torrenegra-Alarcon, Glicerio Leon-Mendez, Nerlis Paola Pajaro-Castro, Vanessa Villalba-Vimos
Effect of the antioxidant activity of the essential oil of Minthostachys mollis G in a meat product type sausage
Contemporary Engineering Sciences, Vol. 11, 2018, no. 80, 3991-3998
doi: 10.12988/ces.2018.85244
Lely A. Luengas C., Jose Luis Gonzalez, Carolina Sandoval, Maria Fernanda Diaz
Algorithm to develop mechatronic devices to help people with muscular dystrophy
Contemporary Engineering Sciences, Vol. 11, 2018, no. 80, 3999-4006
doi: 10.12988/ces.2018.85254