Zeljko Popovic, Ivan Arandelovic, Jelena Nikolic
      A language for 2D parametric and geometric modelling - PrESMod and entity selection
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 5, 203-211
      doi: 10.12988/ces.2013.3316

Monther Abdelhadi
      Improving the bearing capacity of brown clay by using geogrid
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 5, 213-223
      doi: 10.12988/ces.2013.3529

Mazen Musmar
      Tensile strength of steel fiber reinforced concrete
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 5, 225-237
      doi: 10.12988/ces.2013.3531

V. G. Gupta, Kapil Pal
      Harmonic wave excitation in a semi infinite medium
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 5, 239-243
      doi: 10.12988/ces.2013.211

Wafa' Slaibi Alsharafat
      Steady state genetic algorithm in university admission decision
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 5, 245-254 (retracted)

Makiha Kurata, Naoki Yoshida, Saori Fukunaga, Takashiro Akitsu
      Proposed mechanism of photo-induced reactions of chiral threonine Schiff base Cu(II) complexes with imidazole by TiO2
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 6, 255-260
      doi: 10.12988/ces.2013.3634

Nart M. Naghoj
      The effect of height-to-width ratio on the strength of concrete-backed stone masonry prisms
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 6, 261-271
      doi: 10.12988/ces.2013.3635

Yu Hiroshima, Ryosuke Suzuki, Shigeyoshi Watanabe
      Study of pattern area of logic circuit with tunneling field-effect transistors
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 6, 273-284
      doi: 10.12988/ces.2013.3632

Bader M. AlFawwaz, Atallah M. ALShatnawi, Ziad Hunaiti, Osama Harfoushi, Ruba Obiedat, Sahem Nawafleh
      eGovernment: evolving relationship of citizens, government and domestic development - case of Jordan
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 6, 285-295 (retracted paper)

Raqeyah Jawad Najy
      The role of computer aided design (CAD) in the manufacturing and digital control (CAM)
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 7, 297-312
      doi: 10.12988/ces.2013.3736

Shoto Tamai, Shigeyoshi Watanabe
      Analysis of bit cost for stacked type MRAM with NAND structured cell
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 7, 313-327
      doi: 10.12988/ces.2013.3839

Yuki Shoji, Kazuyoshi Sakamoto, Yasushi Itoh
      L-band SiGe HBT reflection type phase shifters using active loads with varactor-loaded LC-resonators and RC-feedback circuits
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 7, 329-340
      doi: 10.12988/ces.2013.3841

Shoto Tamai, Shigeyoshi Watanabe
      Design method of stacked type NAND MRAM with ultra low bit cost
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 7, 341-358
      doi: 10.12988/ces.2013.3944

Shoto Tamai, Shigeyoshi Watanabe
      Design scheme considering memory cell array noise for stacked type MRAM with NAND structured cell
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 8, 359-376
      doi: 10.12988/ces.2013.3945

Shoto Tamai, Shigeyoshi Watanabe
      Novel cell array noise cancelling design scheme for stacked type MRAM with NAND structured cell
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 8, 377-391
      doi: 10.12988/ces.2013.3946

Anas Jebreen Atyeeh Husain
      New roll-up operator for non-additive numeric measure summarization
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 8, 393-402
      doi: 10.12988/ces.2013.3843

Shuangmei Wang
      Novel current limit value test technology with voltage-mode
      Contemporary Engineering Sciences, Vol. 6, 2013, no. 8, 403-406
      doi: 10.12988/ces.2013.31059